eSUN 1.75mm Light Brown PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Light Brown
Buy eSUN 1.75mm Light Brown PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Light Brown at
eSUN 3D Printer Filament: PLA PRO (PLA+) PLA+ is like PLA, but better! As compared to PLA, PLA+ (PLA PRO) is: - Several times stronger than standard PLA (printouts are very hard to break!) - Superb layer bonding - High rigidity - Better glossiness - Smoother finish - No cracking or brittle problems 1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C - 225C Spool Diameter: 8 - Spool Width: 2.50 - Spool Hub Hole Diameter: 2.05 - Inner Circle Diameter: 3.5 Extrusion Temperature Range: 205 to 225 Celsius PLA PRO (PLA+) print temperature is about 20 Celsius higher than regular PLA. Most users print at around 210 to 215 Celsius. PLA+ has a low shrage rate and sticks very well both to bed and layer to layer. PLA+ is a biological , extracted and purified from corn grain, eco- friendly, odorless, and harmless to human. This product is vacuum packed with a manual. It is not easy to absorb moisture and is ok for long-term storage. It absorbs slower and less moisture than standard PLA. WARNING: This filament - when used for 3D printing - can expose you and others in the same room to chemicals known to the State of California to cause cancer. www.p65Warnings.ca.gov ALWAYS USE THIS PRODUCT IN A WELL VENTILATED AREA.
Esun ePLA-Lite 1.75mm 3D printer filament 1kg Dimensional accuracy+/
Toughness Enhanced PLA Filament: Premium PLA filament, its toughness is several times that of ordinary PLA, easy to print, low shrinkage and good
PLA Plus(PLA+) Filament 1.75mm, Strong Toughness Brown PLA 1kg Spool(2.2lbs), PLA Pro 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, Fit Most
PRO Series PLA Filament 10 Pack - 1.75mm
DURAMIC 3D PLA Filament 1.75mm , 3D Printing Filament 1kg Spool(2.2lbs – Duramic 3D
A tough, resilient material with a matte, opaque appearance, eSun PLA+ filament has added strength, making it several times more durable than regular PLA. Although it’s not as tolerant of heat as ABS, PLA better adheres to surfaces, making it easier to print with. The reinforced spool with a bigger inner diameter allows for effortless filament extrusion, ensuring smoother, better-looking prints.
eSUN PLA+ Filament - 1kg / 1.75mm Assorted 5-Pack (Colors: White, Black, Light Blue, Purple, Pink)
DURAMIC 3D PLA Filament 1.75mm , 3D Printing Filament 1kg Spool(2.2lbs – Duramic 3D
eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +
PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.
eSUN 3D Printer PLA+ Filament 1.75mm 1KG/Roll - Peak Green
eSUN PLA+ Filament 1.75mm 1kg (2.2lb) – INTSERVO 3D Printing Store
eSUN PLA+ Filament 1.75mm 1kg (2.2lb) – INTSERVO 3D Printing Store
【Designed for High Speed Printer】Under same model and printing time, eSUN PLA HS can print 3-5 times faster at a speed of 250mm/s than ordinary PLA at
eSUN PLA HS High Speed PLA Filament 1.75mm, 3D Printer Filament Fast Print High Flow Speedy PLA, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS)
Inland 1.75mm Glass Light Blue PLA 3D Printer Filament - 1kg Spool (2.2 lbs) - Micro Center
eSUN 3D Printer Filament: PLA PRO (PLA+) PLA+ is like PLA, but better! As compared to PLA, PLA+ (PLA PRO) is: - Several times stronger than standard
eSUN 1.75mm Light Brown PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Light Brown
