BuckToot DC LED Driver

Output Current: 150mA or 350mA , Input Voltage Range: 5Vdc-28Vdc , Dimming: No , Output Protection: Open & Short Circuit , Input Protection: Surge

LED Ballasts & Drivers – Green Brook Online

60V Buck-Boost LED Driver with up to 98% Efficiency has Internal PWM Dimming & Spread Spectrum

LED Drivers — Lighting Supply

This PWM LED Driver is suitable for voltage reduction of 6-25V 900mA, high brightness, LED driver, dimming 5000:1. LD24AJTA has built-in open circuit LED protection, with an efficiency of up to 97%. This LED Driver Board has a typical 5% output current accuracy and a switching frequency of 1MHz. This LED PWM regulator can achieve a maximum current of 1200mA and a maximum output power of 20W by changing the RCS resistance.

LD24AJTA 2 Pcs Adjustable LED Driver Board 20W DC6~25V LED PWM Controller DC-DC Step-Down Constant Current Converter

COM-13716: This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V. This board is based off of the PicoBuck LED Driver, developed in collaboration with Ethan Zonca, except instead of blending three different LEDs on three different channels the FemtoBuck controls just one.

SparkFun COM-13716 LED Lighting Development Tools FemtoBuck LED Driver

LM2596 LED Driver DC-DC Step-down Adjustable CC/CV Power Supply Module

LED Drivers, Constant Current

BuckPuck 302xD - DC/DC Buck Driver - LEDdynamics

Boost-Buck LED Driver Topology for Low Input and Output Ripple for Low EMI by Linear Technology — LED professional - LED Lighting Technology, Application Magazine

Constant Current Lead Driver

Luxdrive FlexBlock - 700mA Constant Current LED Driver with Dimming, Size: One Size