The SPD-485-1 is a passive, rugged, industrial-grade, 2-wire RS485 surge protector that can be used to limit the voltage surges and spikes introduced to the RS485 data lines. This industrial RS485 surge protector features 3-stage surge protection – Gas Discharge Tubes (GDT), protection resistors, and Transient Voltage Suppressors (TVS) - for maximum protection. The SPD-485-1 is designed to connect in series to the input of the protected equipment; when a high-voltage surge is introduced into the input, the GDT conducts electric current after becoming ionized, which in turn discharges the high-voltage surge to the earth ground. The excessive voltage will be further clamped to a safe range that the equipment can accept by the TVS. This industrial 2-wire RS485 surge protector features passive circuitry designs and thus requires no external power; it supports data rates up to 10Mbps and can be used
RS232 / RS485 / RS422 Isolators/ Isolated Converters – CommFront
rs485 spd, rs485 spd Suppliers and Manufacturers at
Draka RS-485 24 AWG FPE
rs485 spd, rs485 spd Suppliers and Manufacturers at
MT-RS485 - Surge protection device - 2762265
RS422 / RS485 to TTL Converter / TTL Repeater (Industrial) – CommFront
COMMFRONT Industrial RS232 Optical Isolator, 3-Wire, 5000V Isolation, Port-Powered, 600W Surge Protection and 15kV Static Protection : Electronics
Type N F/F In/Out Coax RF Surge Protector, 800MHz - 2.5GHz, DC Pass, 300W, IP67
RS232 / RS485 / RS422 Isolators/ Isolated Converters – CommFront
COMMFRONT Industrial RS232 Isolator, 3-Wire (5VDC-Powered), 5000V Isolation, High Speed, 600W Surge and 15kV ESD Static Protection : Electronics
COMMFRONT Industrial 2-Wire RS485 Surge Protector, Passive, 3-Stage Surge Protection, DIN-Rail Mount
AC 275 V/385V SPD Surge Protection Device 2 Pole Surge Protector - China Power Surge Protection Device, Surge Protective Device
Surge Suppressor Units, Surge Arrestors