eSun PLA-GF (Glass Fiber) – Bits4Bots

The printing filament developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort; Description High impact resistance and good printability of PLA; Suitabl
The printing filament developed on the basis of PLA is added with 16% glass fiber, which greatly enhances the rigidity and impact resistance of ordinary PLA. The bending modulus is as high as 4400MPa, which is highly rigid and not easy to distort; Description High impact resistance and good printability of PLA; Suitable for mechanical parts prototypes with requirements for rigidity and impact resistance; Wear-resistant performance makes it suitable for printing gears and can be used as temporary functional parts. Sellingpoint High rigidityHigh impact resistanceHigh wear resistanceExcellent printability Filament Properties Table 3D PRINTING FILAMENT ePLA-GF Density(g/cm3) 1.31 Heat Distortion Temp(℃,0.45MPa) 565/10 Melt Flow Index(g/10min) 6.36（190℃/2.16kg） Tensile Strength(MPa) 59.277/10 Elongation at Break(%) 7.991/10 Flexural Strength(MPa) 85.018/10 Flexural Modulus(MPa) 4414.898/10 IZOD Impact Strength(kJ/㎡) 10.162/10 Durability 4/10 Printability 9/10 Recommended printing parameters Extruder Temperature(℃) 190 – 230℃Recommended temperature：215℃ Bed temperature(℃)  45 – 60°C Fan Speed  100% Printing Speed  40 – 100mm/s Heated Bed  Optional Recommended Build Surfaces Masking paper, PVP solid glue, PEI   1. ePLA-GF line has strong rigidity and is not easy to bend. In the feeding pipeline, excessive bending of filament should be avoided as far as possible 2. ePLA-GF is very easy to grind the nozzle and extruder gear. It is recommended to use hardened steel nozzle or ruby nozzle. If conditions permit, hardened steel extruder gear can be selected. If the printing time is long and the plug occurs, the throat and nozzle need to be replaced 3. The blowing fan can be properly turned off to improve the model strength

ePLA-GF Glass Fiber Reinforced PLA Filament eSUN 3D

ePLA-GF Glass Fiber Reinforced PLA Filament eSUN 3D

ePLA-GF Glass Fiber Reinforced PLA Filament eSUN 3D

ePA-GF eSUN 3D printer Filament

ePLA-GF Glass Fiber Reinforced PLA Filament eSUN 3D

eSUN ePLA-HS 1.75mm 3D Filament 1KG – eSUN Offical Store

eSun Glass Light Blue PLA – GreyBeard3D

eSUN PLA HS High Speed PLA Filament 1.75mm, 3D Printer Filament Fast Print High Flow Speedy PLA, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers,Blue

eSun PLA-GF (Glass Fiber) – Bits4Bots

eSun Exotics – tagged exotic – Page 2 – Bits4Bots

PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.

eSUN High Speed PLA+ Filament 1.75mm, 3D Printer Filament Speedy PLA Plus for Fast Printing, Dimensional Accuracy +/- 0.03mm, 1kg Spool (2.2 lbs) 3D

eSUN PLA+ Filament 1.75mm, 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Black : Industrial & Scientific